Li Y., Selvamanickam V., Galstyan E., Chen S., Rey C.M., Schmidt R.M., Majkic G., Paidpilli M., Goel C., Yerraguravagari V., Jain R., Shyam V., Oad M., Carnes T.H.
Chaud X., Li Y., Selvamanickam V., Galstyan E., Chen S., Song J., Schmidt R., Jaroszynski J., Abraimov D., Majkic G., Bradford G., Sandra J.S., Paidpilli M., Goel C., Yerraguravagari V., Jain R., Kadiyala J.
Senatore C., Bordini B., Verweij A., Siemko A., Bernhard A., Will A., Schmidt R., Wollmann D., Bonura M., Mentink M., Mueller A.-S., Oslandsbotn A., Schubert J.
Ключевые слова: proton irradiation, irradiation effects, cryogenic systems, pulsed operation, LTS, NbTi, Nb3Sn, strands, mechanical properties, strain effects, transport currents, magnetic field dependence, RRR parameter, degradation studies, minimum quench energy, pinning force, upper critical fields, experimental results, numerical analysis, comparison
Verweij A., Schmidt R., Wollmann D., Denz R., Mentink M., Ravaioli E., Zerlauth M., Mateos F.R., Bortot L., Lindstrom B., Belanger P., Uythoven J., Valette M., Wiesner C.
Ключевые слова: LHC, upgrade, luminosity, protective system, proton irradiation, losses, modeling
Bottura L., Tock J., Auchmann B., Bednarek M., Calcoen D., Charifoulline Z., Coelingh G., D'Angelo G., Hagen P., Naour S.L., Mentink M., Milanese A., Bottura M.L., Tock J., Auchmann B., Bednarek M., Calcoen D., Charifoulline Z., Coelingh G., D'Angelo G., Hagen P., Rodriguez-Mateos F., Romera I., Scheuerlein C., Schmidt R., Siemko A., Solfaroli M., Steckert J., Todesco E., Verweij A., Willering G., Wollmann D., Zerlauth M., Naour S.L., Mentink M., Milanese A., Modena M., Montabonnet V., Perin A., Pojer M.
Ключевые слова: accelerator magnets, LHC, fault currents, modeling, numerical analysis
Senatore C., Verweij A., Siemko A., Will A., Schmidt R., Wollmann D., Bonura M., Mentink M., Raginel V., Kleiven D., Kulesz K.
Bottura L., Rossi L., Verweij A., Willering G., Siemko A., Bajko M., Fessia P., Hagen P., Modena M., Todesco E., Tommasini D., Auchmann B., Schmidt R., Rijk G.d., Perez J.C., Tock J.P., Naour S.L., Bruning O., Mapelli D.
Ключевые слова: LHC, magnets dipole, training effect, LTS, Nb3Sn, coils, quench current, quench, distribution, thermal loads
Bottura L., Rossi L., Verweij A., Willering G., Siemko A., Bajko M., Fessia P., Hagen P., Modena M., Todesco E., Tommasini D., Auchmann B., Schmidt R., Rijk G.d., Perez J.C., Tock J.P., Naour S.L., Bruning O.
Ключевые слова: training effect, LTS, NbTi, coils, current, quench, distribution, experimental results, LHC, magnets dipole
Bottura L., Rossi L., Verweij A., Willering G., Siemko A., Bajko M., Fessia P., Hagen P., Modena M., Todesco E., Tommasini D., Auchmann B., Schmidt R., Rijk G.d., Perez J.C., Naour S.L., Bruning O., Tock J.
Ключевые слова: LHC, dip coating technique, training effect, LTS, NbTi, quench properties
Zhang Y., Hazelton D.W., Schmidt R.M., Nakasaki R., Knoll A.R., Abraimov D., Sundaram A., Brownsey P., Kasahara M., Fukushima T., Carota G.M., Cameron J.B., Schwab G., Hope L.V., Kuraseko H.
Granieri P.P., Verweij A., Auchmann B., Schmidt R., Wollmann D., Steckert J., Priebe A., Dehning B., Sapinski M., Cerutti F., Solfaroli M., Bruce R., Redaelli S., Wenninger J., Baer T., Bednarek M., Bellodi G., Bracco C., Chetvertkova V., Hofle W., Holzer E.B., Lechner A., Del Busto E.N., Salvachua B., Shetty N., Skordis E., Valuch D., Zerlauth M.
Ключевые слова: LHC, magnets, quench detection, minimum quench energy, density, test results, irradiation effects, experimental results, numerical analysis
Verweij A., Pojer M., Siemko A., Schmidt R., Steckert J., Ravaioli E., Dahlerup-Petersen K., Formenti F., Montabonnet V., Camillocci M.S., Thiesen H.
Ключевые слова: LHC, magnets dipole, quench detection, accelerator magnets, transient performance, high field magnets
Ключевые слова: HTS, coated conductors multifilamentary, fabrication, buffer layers, MOCVD process, REBCO, electrodeposition, ac losses
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Chen Y., Rar A., Schmidt R., Xie L., Selvamanickam D.H., Marchevsky M.
Ключевые слова: presentation, HTS, YBCO, coated conductors, pilot-scale, mechanical properties, strain effects, stress effects, tensile tests, cables three-in-one, current-voltage characteristics, critical current, ac losses, fault currents, test long-term operation, critical current, critical current density, thickness dependence, MOCVD process, homogeneity, angular dependence, REBCO, texture, long conductors, joint resistances, experimental results, power equipment, status
Lee S., Xiong X., Qiao Y., Xie Y., Xie Y., Knoll A., Zhang Y., Selvamanickam V., Chen Y., Zhang B., Rar A., Schmidt R., Marchevsky M., Sambandam S., Majkic G., Sundaram A., Dackow J., Guevara A., Kesign I.
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Dackow J.
Ключевые слова: HTS, YBCO, coated conductors, economic analysis, presentation
Xiong X., Qiao Y., Chen Y., Zhang X., Lenseth K.P., Schmidt R.M., Rar A., Martchevskii M., Herrin J., Xie Y-Y., A.Knoll, Selvamanickam D.H.
Ключевые слова: presentation, HTS, YBCO, coated conductors, cables three-in-one, fabrication, current-voltage characteristics, ac losses, coils insert, coils solenoidal, high rate process, grain alignment, current distribution, homogeneity, long conductors, thickness dependence, REBCO, critical current, angular dependence, mechanical properties, stress effects, strain effects, tensile tests, bending process, review, experimental results, power equipment, critical caracteristics
Xiong X., Qiao Y., Xie Y., Chen Y., Zhang X., Lenseth K.P., Schmidt R.M., Rar A., Martchevskii M., Herrin J., Jimenez J., A.Knoll, Selvamanickam D.H.
Ключевые слова: presentation, HTS, YBCO, coated conductors, fabrication, cables three-in-one, grid operation, coils insert, coils solenoidal, current-voltage characteristics, high rate process, IBAD process, MOCVD process, grain alignment, critical current distribution, homogeneity, long conductors, thickness dependence, REBCO, angular dependence, review, power equipment, critical caracteristics
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Rar A., Schmidt R., Chen S.Y., Martchevski M., Gogia B.
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Rar A., Schmidt R., Chen S.Y., Martchevski M., Gogia B.
Ключевые слова: presentation, HTS, YBCO, coated conductors, high rate process, pilot-scale, critical current, homogeneity, MOCVD process, doping effect, critical current, thickness dependence, current-voltage characteristics, angular dependence, magnetic field dependence, defects columnar, microstructure, nanoscaled effects, stabilizing layers, wires multifilamentary, ac losses, coils solenoidal, ac losses, Roebel conductors, power equipment, critical caracteristics, fabrication
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Rar A., Schmidt R., Chen S.Y., Martchevski M., Gogia B.
Ключевые слова: HTS, YBCO, coated conductors, joints, mechanical properties, critical current, long conductors, homogeneity, current-voltage characteristics, joint resistances, insulation coating, FCL resistive, test results, cables three-in-one, thermal stability, economic analysis, defects, pilot-scale, measurement setup, presentation, power equipment, critical caracteristics
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Rar A., Schmidt R., Chen S.Y., Martchevski M., Gogia B.
Ключевые слова: HTS, YBCO, coated conductors, pilot-scale, capacity, IBAD process, buffer layers, high rate process, electropolishing process, collaborations, plans, economic analysis, presentation, fabrication
Xiong X., Qiao Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Gogia B., Marchevsky M., Xie Y.-.
Ключевые слова: presentation, HTS, coated conductors, pilot-scale, fabrication, cables three-in-one, grid operation, YBCO, REBCO, MOCVD process, doping effect, critical current, angular dependence, defects columnar, coils, joints, anisotropy, current-voltage characteristics, economic analysis, power equipment, critical caracteristics, status
Xiong X., Qiao Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Weber C., Rar A., Schmidt R., Gogia B., Marchevsky M., Xie Y.-.
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Hazelton D., Rar A., Schmidt R., Marchevsky M.
Xiong X., Qiao Y., Knoll A., Selvamanickam V., Xie Y.Y., Chen Y., Weber C.S., Lenseth K.P., Schmidt R.M., Rar A., Marchevsky M.
Xiong X., Qiao Y., Xie Y., Knoll A., Lenseth K., Selvamanickam V., Chen Y., Zhang X., Rar A., Schmidt R., Gogia B., Marchevsky M., Pethuraja G., Dutta P.
Xiong X., Xie Y., Lenseth K., Selvamanickam V., Chen Y., Zhang X., Rar A., Schmidt R., Martchevskii M., Herrin J.
Selvamanickam V.(selva@igc.com), Xiong X., Hazelton D.W., Zhang X., Tekletsadik K., Xie Y.-Y, Lenseth K.P., Schmidt R.M., Qiao Y.(yqiao@igc.com)
Ключевые слова: coated conductors, review, YBCO, coils pancake, IBAD process, MOCVD process, FCL resistive, HTS, power equipment, fabrication
Xiong X., Xie Y., Lenseth K., Selvamanickam V., Chen Y., Zhang X., Rar A., Schmidt R., Martchevskii M., Herrin J.
Xiong X., Xie Y., Lenseth K., Selvamanickam V., Chen Y., Zhang X., Rar A., Schmidt R., Martchevskii M., Herrin J.
Ключевые слова: presentation, HTS, coated conductors, YBCO, cables three-in-one, current-voltage characteristics, ac losses, coils insert, design parameters, critical current, MOCVD process, thickness dependence, hot spots, high rate process, texture, power equipment, critical caracteristics, fabrication
Xiong X., Qiao Y., Reeves J., Xie Y., Lenseth K., Selvamanickam V., Zhang X., Rar A., Schmidt R., Martchevskii M., Chen P.Y., Herrin D.H.
Ключевые слова: presentation, HTS, coated conductors, critical current, thickness dependence, MOCVD process, high rate process, long conductors, homogeneity, texture, cables three-in-one, current-voltage characteristics, ac losses, coils insert, magnets, review, YBCO, design parameters, power equipment, critical caracteristics, fabrication
Xiong X., Qiao Y., Selvamanickam V., Xie Y.Y., Hazelton D.W., Reeves J.L., Chen Y., Zhang X., Tekletsadik K., Lenseth K.P., Schmidt R.M., Rar A.
Ключевые слова: HTS, YBCO, coated conductors, IBAD process, MOCVD process, long conductors, coils pancake, FCL resistive, review, power equipment, fabrication
Li Y., Xiong X., Qiao Y., Selvamanickam V., Reeves J.L., Chen Y., Xie Y.-Y., Lenseth K.P., Schmidt R.M., Rar A.
Ключевые слова: HTS, YBCO, coated conductors, long conductors, IBAD process, buffer layers, films epitaxial, high rate process, fabrication, length
Xiong X., Qiao Y., Reeves J., Xie Y., Lenseth K., Selvamanickam V., Chen Y., Zhang X., Rar A., Schmidt R.
Li Y., Xiong X., Qiao Y., Xie Y., Selvamanickam V., Reeves J.L., Chen Y., Lenseth K.P., Schmidt R.M.
Ключевые слова: HTS, YBCO, coated conductors, long conductors, IBAD process, buffer layers, films epitaxial, fabrication, high rate process, template layers, homogeneity, presentation, length
Li Y., Xiong X., Qiao Y., Xie Y., Reeves J.L., Chen Y., Lenseth K.P., Schmidt R.M., Selvamanickama V.
Ключевые слова: HTS, coated conductors, IBAD process, buffer layers, template layers, long conductors, fabrication, length
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.